Columns and Balustrades
Quote Request

Balusters

 

The rich look and feel of Synthetic Stone balusters are not only
beautiful but practical as well. They are easy to clean, lightweight,
yet very strong and versatile enough to use in or outdoors. Each
baluster can be secured in place using construction adhesive! All
designs meet 4” sphere code requirements and when completed,
finish rail height is 36”-37”.

Maximum distance between
square part of baluster for 4”
sphere code requirement.
Check measurements before
laying out balusters. Installer
responsible to meet code
requirements.

A-1 = 2 1/8”
A-2 = 1 5/8”
B-1 = 1 5/8”
B-2 = 1 1/4”
B-3 = 1 1/8”
B-4 = 1 1/2”
C-1 = 1”
C-2 = 1”
D-1 = 3 7/8”

 
balusters

SyntheticStone, Inc.


Columns & Balustrade

Product Information and Benefits
 
  • Costs less than polyurethane balusters; no painting required.

  • Synthetic stone is 1/3 the weight of real limestone. Our 5.5” Balustrade systems
    weigh approximately 53 lbs per foot.

  • Can be installed on conventional framing, eliminating costly masonry load
    bearing cost.

  • Can match any custom design that builder requires.

  • Textured finish gives a real stone feel and appearance.

  • Carpenters can install with traditional woodworking tools. No mason needed. Installers available by request.

  • Available in 5 different colors; product is solid color throughout.

  • May be painted; will hold paint better than wood.

  • Minimal expansion and contraction.

  • No joints and seams to separate or caulk in our Newel post.

  • Handrail can be used as an electrical conduit.

  • Newel post design allows for very solid installation.

  • Rail systems are extremely rigid, eliminating movement of handrails.

  • Radius or ramp and curved rail systems may be special ordered.

  • Columns are load bearing and are similar to fiberglass in weight. Caps and bases
    are the same material (not plastic)

  • Water, insect and impact resistant; will not rot.

  • Warranty and complete installation instructions provided.

  • To clean, simply add Soft Scrub with Bleach in a pail of water. Scrub material
    with a stiff brush, then spray off with water. NEVER use a power washer on
    product. Powerwashing will cause streaking.

Name*
Phone*
E-mail Address*
City/State*
Project Details
* indicates required field